MEAN WELL AC Phase Cut Dimmable LED Drivers

MEAN WELL PHASE CUT DIMMABLE LED DRIVERS
Installation Advice

There are no MEAN WELL Phase Cut dimmable LED drivers that carry the necessary Australian Electrical Safety Certification.

 

Constant Voltage AC Dimmable LED Drivers

MEAN WELL doesn’t manufacture a constant voltage phase cut dimmable LED driver.

However, if you are looking for a LED driver with a similar quality to that of MEAN WELL, then ADM does stock the Power Source range of premium quality constant voltage phase cut dimmable LED drivers.

There are two different styles available:

Power Source PDV-75 LED Driver
Power Source IP20 Indoor LED Driver

 

Power Source PDV-300 LED Driver
Power Source IP66 Outdoor LED Driver

 

Please note as with all outdoor LED drivers, the IP66 models should not be mounted in direct sunlight, as this will cause the temperature in the LED driver to exceed the maximum operating temperature range. They should also not be submerged in water. This is because IP66 rated equipment is tested for protection against strong jets of water, the testing does not involve submerging the driver in water. There is a list of the models available at the end of this blog post.

All constant voltage phase cut dimmable LED drivers stocked by ADM have an Australian approved factory fitted 1m flex and plug.

Australian customers, who already purchase MEAN WELL LED drivers from ADM will know that we only stock LED drivers with Australian approvals. This applies to our range of phase cut dimmable constant voltage LED drivers. 

Product Quality

Over a couple of years ADM sampled and tested phase cut dimmable LED drivers from a number of different manufacturers, but none ever performed to a level that we felt was acceptable.

Until we tested the Power Source LED Drivers!

When ADM commenced testing this range of phase cut dimmable LED drivers they looked promising from the outset. We conducted vigorous testing using various different leading edge and trailing edge dimmers.

This involved ADM constructing our own test apparatus and trialling the dimming performance of the LED drivers under varying types of loads.

The Power Source range of LED drivers performed very well, meeting ADM’s high expectations for performance and quality.

You can download a dimmer switch compatibility table for the Power Source constant voltage phase cut dimmable LED drivers by using the below link:

Power Source Phase Cut Dimmable LED Driver Compatibility Table

Warranty

All Power Source phase cut dimmable LED drivers carry a 5-year warranty.

Support

ADM has more than 30 years’ experience of helping customers find the right power supply for their application. If you would like assistance with finding the right LED driver, then contact ADM. A member of our helpful team will gladly answer any questions that you may have.

We are also here to help you if you run into difficulties after you have received your delivery.

10 September 2024